Nitro N2 Solid-State Drive (SSD) is our latest enterprise class product designed to deliver uncompromised performance and efficiency in Data Center environments. Nitro N2 SSD offers enhanced read and write speeds, industry-leading random IOPS, and the highest storage density of any product on the market.

Energy Efficient

Nitro N2 was designed to offer the highest levels of performance per watt, a metric that is highly justifiable in data centers struggling to keep available IO high and energy costs low. Until now, this type of performance efficiency was unheard of in data center environments.

The Nitro is capable of providing 13,000 IOPS/watt, this is over 160X better than hard disk drive alternatives. The end result to customers is reduced short term IT spending, lower energy and maintenance costs, and higher levels of performance and reliability; this equates to a significant reduction in overall Total Cost of Ownership (TCO) and more 'Green Friendly' operations.

Superior Performance and Storage Density

Nitro N2 accelerates performance to industry-leading levels by leveraging a multi-channel, highly parallel controller architecture called PIPA utilizing high-speed 32-bit DDR3 Dynamic Random Access Memory (DRAM) for processor offloading and data buffering. The result is throughput reaching 540MB/s over a SATA 6Gb/s interface and random input/outputs (IOPS) at small block sizes reaching 130,000.

Nitro N2 is offered in a wide range of storage densities from 100GB to 800GB utilizing industry standard Single Level Cell (SLC) NAND Flash based on the latest 2Xnm process technology, or densities to 1.2 and 1.6 Terabyte utilizing the lastest 2Xnm Enterprise Multi Level Cell (eMLC) NAND flash technology. This allows the highest possible densities in smaller form-factors and higher device-level performance than storage devices built using older lithography techniques.


Interface, Capacity, Memory Technology

Host Interface Serial ATA (SATA) 3.0 - 6 Gb/s, Backward compatible with SATA 2.0 - 3 Gb/s
Interface Ports Single
Capacities 100 GB, 150 GB, 200 GB, 300 GB, 400 GB, 600 GB, 800 GB, 1.2 TB*, 1.6 TB* *eMLC only
Sector Size 512 Bytes
Memory Type Single-Level Cell (SLC) or Enterprise Multi-Level Cell (eMLC) Synchronous NAND Flash


Read Bandwidth (128 KB) 540 MB/s
Write Bandwidth (128 KB) 520 MB/s
Max Read I/O (512 B) 130,000 IOPS
Max Write I/O (512 B) 130,000 IOPS
Rand. Read I/O (4 KB) 100,000 IOPS
Rand. Write I/O (4 KB) 100,000 IOPS
Average Latency < 100 Micro Seconds


Operating Temp. 0° C to +70° C
Non-Operating Temp. -45° C to +85° C
Shock 1500 G, Duration 0.5 ms, Half Sine Wave
Vibration 20 G Peak, 10 ~ 2000 Hz, x3 Axis
Humidity 5% to 95%, Non-Condensing, Relative Humidity
Altitude 24,384 m


MTBF 2.0 Million Hours
Endurance Read: Unlimited, Write: Up to 102 PBW over 5 Years
Power-On Hours 8760 per Year
Data Path Protection BCH ECC - 55-bits per 512-byte sector
Data Encryption AES-256 (FIPS-197 Certified) and TCG-Enterprise Supported Encryption
Temp Sensoring Dual Temp Sensors for Temp Monitoring - Performance throttling in critical temperature zone
Warranty 5 Years


Power Protection VoltStream Power Monitoring, Protection, and Power-Fail Hold-up
Input 5.0 V
Idle 4.5 W
Typical 10.5 W
Max 15.5 W


Height 9.5 mm
Length 100.5 mm
Width 69.85 mm
Weight 200 g

Ordering Information

Product Part Number
100 GB Nitro N2S SSD PS-N2D2CSHS100G1C
150 GB Nitro N2S SSD PS-N2D2CSHS150G1C
200 GB Nitro N2S SSD PS-N2D2CSHS200G1C
300 GB Nitro N2S SSD PS-N2D2CSHS300G1C
400 GB Nitro N2S SSD PS-N2D2CSHS400G1C
600 GB Nitro N2S SSD PS-N2D2CSHS600G1C
800 GB Nitro N2S SSD PS-N2D2CSHS800G1C
100 GB Nitro N2E SSD PS-N2D2CSHE100G1C
150 GB Nitro N2E SSD PS-N2D2CSHE150G1C
200 GB Nitro N2E SSD PS-N2D2CSHE200G1C
300 GB Nitro N2E SSD PS-N2D2CSHE300G1C
400 GB Nitro N2E SSD PS-N2D2CSHE400G1C
600 GB Nitro N2E SSD PS-N2D2CSHE600G1C
800 GB Nitro N2E SSD PS-N2D2CSHE800G1C
1.2 TB Nitro N2E SSD PS-N2D2CSHE012T1C
1.6 TB Nitro N2E SSD PS-N2D2CSHE016T1C